GODIAG GD101 openport 2.0 J2534 is compatible with Honda HDS 3.104.024, Toyota Techstream V17.30.011, JLR SDD V163, Forscan 2.3.48, scanmaster v2.1, pcm-flash 1.2.0, VAG ODIS 9.1.0 and Renault Clip V227/V230.
Works with J2534 Passthru and ELM327
Has the similar functionality as Tactrix Openport 2.0
GODIAG GT100+ is a new generation OBDII Break Out Box Including all the functions of GODIAG GT100
ECU connection + OBDII Protocol Detector + Electronic Current Display
Compatible with tools from LAUNCH, AUTEL, FOXWELL, XHORSE, VXDIAG, CGDI.....
Add Current Display for ECU Module
Support more protocols like CANBUS, K-Line, PWM, VPW+, KWP2000
Support All Key Lost for Porsche, VW,Mitsubishi,etc
GODIAG GT100+ Breakout Box ECU Tool with BMW CAS4 CAS4+ and FEM BDC Test Platform Support All Key Lost
Update Version of GODIAG GT100, add Current Display for ECU Module
Support BMW CAS4 CAS4+ and FEM BDC Test Platform Support All Key Lost
Compatible with most device, such as Xhorse vvdi2, Autel IM608, Launch Scanner, Vident Scanner, and so on.
Faster Shipping from UK/CZ without tax.
Godiag CAS4/CAS4+ programming test platform is a dedicated device developed for maintenance engineers and CAS4 / CAS4+ programming engineers.
Working together with Xhorse vvdi2/VVDI BIM tool/ K518/ IM608/IM508/GODIAG GT100 etc, GODIAG CAS4 CAS4+ BMW test platform can program a new key when all keys are lost, can add new key and replace CAS4/ CAS4+ ECU module.
Support all key lost,add new key,synchronize test and troubleshooting.Applicable to 5 series (2010-2014) F07/F10/F11/F18, 6 series(2011-2013) F01/F02, 7 series(2009-2013) F12/F13
GODIAG ECU GPT Boot AD programming adapter can help customers read and write ECU data without disassembling the ECU using the OBD2 Bench or GTP Bench method or disassembling the ECU and using the Boot method. This product is equipped with a short-circuit-proof BOOT resistance board connection line to protect the ECU. Customers can use it with J2534 devices and PCMFLash software.
GODIAG BMW FEM/BDC Test Platform is a dedicated device developed for BMW locksmiths, maintenance engineers and FEM/BDC programming engineers.
Work with Xhorse VVDI2/Key Tool Plus Pad, Autel IM608, CGDI BMW etc.
Support FEM/BDC BMW F20 F30 F35 X5 X6 I3
Detect CAS2 CAS3 and key synchronization
Solder-free matching CAS2/CAS3 serial smart key
Compatible with multi BMW programmers Xhorse, Autel, CGDI, Lonsdor, OBDSTAR etc
GODIAG GT100 mainly used for changing automotive diagnostic OBD stitch to signal judgment level transfer.
Supply power to the car when changing battery, in order to prevent the body electrical equipment locked automatically.
Detect car communication by working with any diagnostic tool.
Supports OBDII 16PIN protocol communication detection and ECU maintenance, diagnosis, programming, coding.
GODIAG GT101 PIRT Power Probe is a multi-function circuit tester with the diagnostic power from the car battery or the external battery. It is the best electrical tester for reducing diagnostic time in all 6- to 40-volt vehicle electrical systems.
This is an advanced power circuit probe tester and more than your typical tester. It will do relay resting, fuel injector testing and cleaning as well.
GODIAG ECU IMMO Kit GT105 ECU IMMO Prog
Newest GT107 DSG Gearbox Data Read/Write Adapter
To read and write DQ250, DQ200, VL381, VL300, DQ500, DL501 Gearbox TCU
Read/write DSG gearbox data with pcmtuner module 58/kess v2/ktm bench etc
Compatible with tools from AUTEL, LAUNCH, XHORSE, etc.
Used to connect ECU for ECU Reading and Writing via OBD2 way such as MPPS, FGTECH, KESSV2, BYSHUT, DISPROG and so on.
GODIAG Key Tool Plus Practical Instruction 1&2 Two Books for Locksmith and Vehicle Maintenance Engineer, which covers the introduction of KEY TOOL PLUS tablet, car IMMO knowledge, and KEY TOOL PLUS usage skills, also includes the frontline engineer's real car key matching operation process and their summarized precautions.