BRAND DAY SALE EU/UK Ship New Released GODIAG GT100+ GT100 Pro Breakout Box Plus GODIAG ECU GPT Boot AD Programming Adapter Compatible J2534/ Openport/ PCMFlash/ foxFlash/CG FC200

Product Description

GODIAG GT100+ GT100 Pro Breakout Box Plus BMW CAS1/ CAS2/ CAS3/ CAS4/ CAS4+ and FEM/ BDC Test Platform

Highlights:

1. Bunding Package: GT100+ GT100 Pro Breakout Box + GODIAG ECU GPT Adapter.
2. GODIAG GT100+ can support communication detection and ECU maintenance/ diagnosis/ programming/ coding.
3. GODIAG ECU GPT Adapter can help customers read and write ECU data without disassembling the ECU using the OBD2 Bench or GTP Bench method or disassembling the ECU and using the Boot method. This product is equipped with a short-circuit-proof BOOT resistance board connection line to protect the ECU. Customers can use it with J2534 devices and PCMFLash software.
6. Compatiable with most device like J2534/ Openport/ PCMFlash/Foxflash /PCMTuner/CG FC200 /VVDI Multi-Prog etc to do test which make your operation much easier. 

HighLights for GODIAG GT100+:

1. Used to check whether the diagnostic / programming / coding tool can send communication signals.
2. Connected to a single ECU module, is convenient for a user to do the single-module diagnosis and programming.
3. With Voltage and Current Value Display function to check the current status of the ECU
4. Can work with most device to do test, will make your operation much easier , such as xhorse vvdi2, Autel Scanner, Launch Scanner, Vident Scanner, and so on.
5. GT100+ will display CANBUS, K-Line, Pwm, Vpw+, KWP 2000 protocol communication.
6. Quickly communicate with a single ECU on bench by connecting with the ECU diagnostic / programming tool.
7. Multiple vehicle ECU module connecting.
8. Replace the auxiliary power supply for the battery - uninterruptible power supply connecting mode.
9. Work Together with BMW CAS4 & CAS4+ Test Platform and xhorse VVDI2/Lonsdor K518/CGDI/Autel im608 Support Off-site Key Programming/All Keys Lost/ Add New Key
10.Work Together with BMW FEM BDC Test Platform, to program FEM BDM Keys.

 

 

 
GODIAG ECU GPT Boot AD ECU Connector Features:

1. Support GPT to read and write data without disassembling the ECU.
2. Support ECU opening BOOT method to read and write data
3. Support ECU conversion to OBD2 mode to read and write data
4. Equipped with BOOT resistance board connecting cable [anti-lost resistor design]
5. Support RESET, BOOT, CNF1, GPT1, GPT2, 5V, 3.3V, VPP, GND.
6. Support PCMFlash automatic control of ignition power supply
7. Support manual ignition power control
8. CANbus is equipped with a switch to freely select the 120Ω resistor
9. ECU dedicated connection terminal.
10. The ECU interface cable is labeled

Notice: GODIAG ECU GPT Boot AD cannot be used alone and needs to be used with ECU tools.

GODIAG ECU GPT Boot AD ECU Connector Functions:

• Diagnostic function supports standard OBD2 protocol equipment.
• Supports ECU reading and writing data, and supports J2534 devices.
• Only Scanmatik 2 PRO for PCMflash allows to form GPT1, GPT2 signals necessary to work with Module 71.
• Other devices Scanmatik OpenPort 2.0, Mongoose JLR, MongoosePro JLR,
• Teradyne GNA600 (VCM 1), Mazda VCM 2 supports OBD2 or BOOT 53 mode to read and write ECU data.

Package List: 

1pc x Host
1pc xOBD 2-in-1 extension cable
1pc xColored jumper cable
1pc xPower supply 12V
1pc xResistance 120 ohm
6pcs xBanana plug
24pcs xWire accessories, Dupont 2.54mm connector female pins
1pc x GODIAG ECU GPT Boot AD Programming Adapter
Contact us:
Whatsapp: +86 15377698251
Email:  sales@godiagshop.eu