Black Friday Sale Ship from EU New Released Xhorse Multi Prog Programmer + Exclusive Adapters + MQB48 Adapters + MQB-RH850 Adapter + GODIAG ECU GPT Boot AD and G-V ECU Cable Bundle Package Kit

Product Description

Xhorse Multi Prog Programmer + Exclusive Adapters + MQB48 Adapters + MQB-RH850 Adapter + GODIAG ECU GPT Boot AD and G-V ECU Cable Bundle Package Kit

Highlights:

1. Bunding Package:
Xhorse Multi-PROG Multi Prog ECU TCU Programmer
Xhorse Multi-Prog Programmer Adapters XDMP04GL VH24 + XDMP05GL VH29 + XDMP06GL VH30 + XDMP07GL VH31
Xhorse Multi Prog Adapters for EEPROM and FLASH 9pcs/set
Xhorse XDMPR8GL MQB-RH850/V850 Adapter
Xhorse MQB48 No Disassembly No Soldering 13 Full Set Adapters XDNPM3GL
GODIAG ECU GPT Boot AD ECU Connector
GODIAG G-V ECU Cable

Xhorse Multi-Prog Programmer Pro-level ECU TCU Programmer

The XDMPG0GL Multi-Prog ECU Programmer is a versatile tool meticulously designed by Xhorse to access and modify crucial data stored in a vehicle's Engine Control Unit (ECU) and Transmission Control Unit (TCU). From engine maps to transmission parameters and immobilizer settings, the XDMPG0GL ECU Programmer empowers users with unprecedented control and customization.

1. Fully Replace VVDI Prog:
Multi-Prog support factory usage mode for batch programming of chips. In this mode, the functions of batch programming, offline programming, and file offline programming can be done easily. 
The main difference between VVDI PROG and Multi-Prog: Multi-Prog has the batch programming function but VVDI PROG programmer doesn't.
2. With Free MQB48 License and BMW Bench Read ISN.
Bind with Xhorse VVDI2/ Key Tool Plus PAD account, then your VVDI2/Key Tool Plus PAD can use MQB48 Function too
3. Read, Write and Clone ECU
4. Read, Write and Clone Gearbox TCU
5. Read EEPROM, ECU, MCU
6. Read and Write Bosch ECU ISN with new Bosch ecu adapter
7. Supports Checksum correction for some EDC16/EDC17 ECUs (more to come)
8. Get free BMW ISN read function and NEC, MPC, Infineon etc chip continously update service
9. With built-in free MQB48 license. Bind Multi-prog and VVDI2 (full version) or key tool plus to the same Xhorse app account to use MQB48 NEC35XX function. 
10. Free software and firmware update timely.

Other Features:

Support R&W lots of chips, include MC9S08 series, MC68HC(9)12series, MC9S12series, V850series, H8Xseries, R8Cseries, PCF79XXseries and most eeprom chips etc .
Support chip data verify, checkblank function
Support data file compare function
Free Pin code calculation service by Dump for various models
Support Read and Write BMW N20, N55 ECU (show ISN directly)
Stable Read and Write MC9S12XE series chips (5M48H/ 1N35H/ 2M53J/ 3M25J etc.)
Support renew PCF79XX remote, currently support BMW E/F series (Please Note PCF79XX adapter is optional)
Has the largest database of connection diagram
Reserve Ports: For future update
Supports Repair Porsche 12V lithium battery and BYD Lithium Battery (MC9S12XET256)
Supports EDC17/MED17 data calculation (checksum correction)
Support for third-party automatic HEX editing scripts 
Supports Expert mode: batch write chips. vvdi prog only write a single chip at a time



Xhorse VH24 SOP44 & TSOP48+VH29 EEPROM & FLASH+VH30 SOP44+VH31 TSOP48 Adapters for Multi-Prog

Xhorse XDMPO4GL VH24 SOP44 & TSOP48 Adapter work with Multi-Prog
Xhorse XDMPO5GL VH29 EEPROM & FLASH Adapter for 8 pin Chip
Xhorse XDMPO6GL VH30 SOP44 Solder Free Adapter
Xhorse XDMPO7GL VH31 TSOP48 Solder Free Adapter


Xhorse Multi Prog Adapters for EEPROM and FLASH 9pcs/set

Package includes adapters XDMP03GL, XDMP09GL, XDMP10GL, XDMP11GL, XDMP12GL, XDMP16GL, XDMP15GL, XDMP14GL and XDMP13GL
These soldering boards support Reading & Writing of common EEPROM and FLASH chips.

XHORSE XDMP03GL Adapter EEPROM&FLASH Soldering Board Supports Reading & Writing of common EEPROM and FLASH chips.
XHORSE XDMP09GL Adapter TSOP56 Adapter Chip holder (Footprint:TSOP56) reads and writes, performs FLASH
XHORSE XDMP10GL Adapter PQFP80 Adapter AM29BDD160G (Footprint:PQFP80) Reads and Writes
XHORSE XDMP11GL Adapter Support ATMEGA103 (Footprint:TQFP64) Reading and Writing
XHORSE XDMP12GL Adapter  MLF28 Adapter Support ATMEGA88PA(Footprint:MLF28) Reading and Writing
XHORSE XDMP13GL Adapter TQFP32 Adapter Support ATMEGA88PA(Footprint:TQFP32) Reading and Writing
XHORSE XDMP14GL Adapter TQFP44 Adapter Support ATMEGA163(Footprint:TQFP44) Reading and Writing
XHORSE XDMP15GL Adapter TQFP100 & ATMEG Adapter Support ATMEGA3250(Footprint:TQFP100) Reading and Writing
XHORSE XDMP16GL Adapter SOP48 Adapter: Support ATMEGA3250(Footprint:TQFP100) Reading and Writing

Xhorse XDMPR8GL MQB-RH850/V850 Adapter for Xhorse MULTI-PROG Pro-level Programmer

Highlights:

No need to cut wire or lift pin to read MQB48/MQB49/5C dashboards.
Need work with Xhorse MULTI-PROG Pro-level Programmer

Supported Dashboards:

VW 4th Gen Johnson Controls 34xx series
MQB 34XX series
MQB-RH850(R7F)series



Xhorse MQB48 No Disassembly No Soldering Adapter 13 Full Set XDNPM3GL

No welding
No warped feet
No cutting wire
Easy to read data without destroying the original dashboard,safer to use
Can be used with Muti-PROG, VVDI PROG (Need DB25 DB15 converter), Key Tool Plus (with MQB48 license activated).

Note: To read MQB NEC35XX immo chip data with xhorse, you need to connect 12V power on MQB adapters (except XNDP82/XNDP84). 

Q: MQB License is included?
A: VVDI Prog and Key Tool Plus need to activate MQB48 license separately. Multi-prog has built-in MQB48 license (bind with vvdi2 full to enable it for free).



GODIAG ECU GPT Boot AD ECU Connector

GODIAG ECU GPT Boot AD programming adapter can help customers read and write ECU data without disassembling the ECU using the OBD2 Bench or GPT Bench method or disassembling the ECU and using the Boot method. This product is equipped with a short-circuit-proof BOOT resistance board connection line to protect the ECU. Customers can use it with J2534 devices and PCMFLash software.

GODIAG ECU GPT Boot AD ECU Connector Features:

1. Support GPT to read and write data without disassembling the ECU.
2. Support ECU opening BOOT method to read and write data
3. Support ECU conversion to OBD2 mode to read and write data
4. Equipped with BOOT resistance board connecting cable [anti-lost resistor design]
5. Support RESET, BOOT, CNF1, GPT1, GPT2, 5V, 3.3V, VPP, GND.
6. Support PCMFlash automatic control of ignition power supply
7. Support manual ignition power control
8. CANbus is equipped with a switch to freely select the 120Ω resistor
9. ECU dedicated connection terminal.
10. The ECU interface cable is labeled

Notice: GODIAG ECU GPT Boot AD cannot be used alone and needs to be used with ECU tools.

GODIAG ECU GPT Boot AD ECU Connector Functions:

• Diagnostic function supports standard OBD2 protocol equipment.
• Supports ECU reading and writing data, and supports J2534 devices.
• Only Scanmatik 2 PRO for PCMflash allows to form GPT1, GPT2 signals necessary to work with Module 71.
• Other devices Scanmatik OpenPort 2.0, Mongoose JLR, MongoosePro JLR,
• Teradyne GNA600 (VCM 1), Mazda VCM 2 supports OBD2 or BOOT 53 mode to read and write ECU data.

GODIAG G-V ECU Cable work with Xhorse MULTI PROG, GT107, GPT BENCH BOOT AD read and write Gearbox ECU

GODIAG G-V ECU Cable is used to connect  Xhorse MULTI PROG with GT107 or GT107+ GPT BENCH BOOT to read and write data on VAG gearbox ECU and engine ECU, clone ECU.




Package Includes:

1pc x Multi-PROG
1pc x USB Cable
1pc x Power Adapter (15V 4A)
1pc x 220V Power Cord
1pc x VH13 Interface Adapter Board
1pc x VH20 Interface Adapter Board
1pc x VH23 Interface Adapter Board
1pc x MCU Adapter Multi-PROG Solder Cable
1pc x MCU DB15 Adapter Cable
1pc x ECU Adapter Multi-PROG Solder Cable
1pc x ECU DB15 Adapter Cable
1pc x Multi-PROG OBD Cable
1pc x USB WIFI Network Card
1pc x Product Manual
1pc x Certificate Of Conformity
43pcs x ECU Cable Plugs

13pcs x Xhorse MQB48 adapters XDNPM3GL

1pc x Xhorse XDMPR8GL MQB-RH850/V850 Adapter for Xhorse MULTI-PROG Pro-level Programmer

1pc x XDMP03GL
1pc x XDMP09GL
1pc x XDMP10GL
1pc x XDMP11GL
1pc x XDMP12GL
1pc x XDMP13GL
1pc x XDMP14GL
1pc x XDMP15GL
1pc x XDMP16GL

1pc x Xhorse XDMP04GL VH24
1pc x Xhorse XDMP05GL VH29
1pc x Xhorse XDMP06GL VH30
1pc x Xhorse XDMP07GL VH31

1pc x GODIAG ECU GPT Boot AD Programming Adapter

 
Contact us:
Whatsapp: +86 15377698251
Email:  sales@godiagshop.eu